COSTE

RADIO EDGE DEVICE allows to make a system made with edges fixed to the moving shutter without having to use cable sleeving systems.
It complies with EN13849-2:2008 Standard, if installed with an RIB Electronic Board it is a Class-2 Device.


RADIO TRANSMITTER for mechanical and electrical strips ACG6202		RADIO RECEIVER with container ACG5501

RADIO EDGE DEVICE TECHNICAL FEATURES

TRANSMITTER
- FREQUENCE
- SENSITIVITY
- OUTPUT POWER
- BATTERY FEED
- IDLE ABSORPTION
- MAX ABSORPTION
- MODULATION
- RANGE
- BATTERIES LIFE
- CASE External
- SIZE
- PROTECTION LEVEL
- OPERATION TEMPERATURE

Code ACG6202

868.3 MHz
-108 dBm
<25 mW
3 x AA1,5 V (> 2,7 Ah)
25 uA
13 mA
TYPE FSK
30 m IN FREE SPACE WITHOUT AERIAL
2 YEARS (AA TYPE)
Technopolimer
129x89x58 mm
IP56
From -20°C to +60°C

RECEIVER
- FREQUENCE
- SENSITIVITY
- OUTPUT POWER
- POWER FEED
- IDLE ABSORPTION
- MAX ABSORPTION
- MODULATION
- RANGE
- RELAY CAPACITY
- CASE External
- SIZE
- PROTECTION LEVEL
- OPERATION TEMPERATURE

Code ACG5501

868.3 MHz
-108 dBm
<25 mW
11÷24 Vac/dc
20 mA
100 mA
TYPE FSK
30 m IN FREE SPACE WITHOUT AERIAL
1A - 30Vdc
Technopolimer
129x89x58 mm
IP56
From -20°C to +60°C

The TOUCH mechanical strip is endowed with 3 microswitches that allow the management of the following functions:
1° A contact for impact’s detection
2° A contact for the breakage of the steel cord
3° A contact for both, the breakage of the steel cord and for the impact’s detection in case the two previous contacts are not functioning (as required by EN13849-2:2008).

TECHNICAL DATA Electric contact capacity Operating temperature Rubber profile stroke to the electric contact intervention Rubber profile stroke from intervention (extra-stroke) Contact opening intervention time Maximum deformation recuperation time Maximum applicable force of device Maximum speed of device in movement	TOUCH EN13849-2:2008 0,5 A - 24 Vac/dc min -10°C, max 50°C max 15 mm min. 40 mm max 0,1 s max. 0,5 s max 1kN max 0,25 m/s*
* If you install TOUCH with gate leaves having a travelling speed higher than 0.25m/s, the safety norm cannot be abide by.


	ACG8610 PHOTOCELL STRIP (panel inside plastic box and stoppers, plus cables and circuits) Aluminium and ruller profile not included	ACG7090 RUBBER PROFILE with double chamber. ACG7095 ALUMINUM PROFILE L = 1 m - to fix rubber profile ACG7090.

FOTOCOSTA - TECHNICAL FEATURES AND CONNECTING
- Max. length of profile = 5 m
- IP 55 electric circuit container
- 12Vdc power supply (D+/D- terminals) - 24Vac/dc(A*/A terminals)
- Modulated transmitter with infrared diode.

PNEUMATIC STRIP


	ACG8600 PNEUMATIC STRIP ELEMENTS SET (plugs + tubes + 2 pressure switches in sealed container)	ACG7090 RUBBER PROFILE with double chamber. ACG7095 ALUMINUM PROFILE L = 1 m - to fix rubber profile ACG7090.