PHOTOCELLS FIT SYNCRO

Transmitter can be supplied by batteries or by cable.
Transmitter infrared ray can be gradually adjusted both horizontally (+/-90°) than vertically (+/-5°).
On transmitter and receiver are connectable the contacts of the strips. Transmitter is applicable together with a strip to the mobile part of the sliding gate to better protect the movement.
Receiver shows when batteries on transmitter are empty.
Sincronizable on 2 different selectable frequencies.

NOVA


PHOTOCELLS range 25 m - ACG8046		PAIR OF COLUMNS ACG8039

Le rayon du transmetteur peut avoir un réglage horizontal de +/- 90° et vertical de +/- 5°
Synchronisme automatique sur 4 différents fréquences à sélectionner.

State-of-the-art FIT SLIM photocells are designed with compact dimensions to meet safety requirements for all automatic gate entry systems.
Wall versions are designed for assembly on posts in steel or other smooth material.
The FIT SLIM photocells can be installed very close together thanks to the new SYNCHRO function.

FIT SLIM TECHNICAL SPECIFICATIONS

BOXES: external in polycarbonate, internal in shockproof PS, packings in thermoplastic rubber.
DIMENSIONS: 35x110x25 mm
POWER INPUT: 12Vdc/24Vac (select using the jumper on the electronic circuit). Make sure the system is compatible with the power provided by the power unit.
POWER CONSUMPTION: 60mA max.
TRANSMITTER: modulated with infrared diode
CAPACITY OF RELAY: 1A - 30Vdc
PROTECTED TO: IP44
GREEN LED: TRANSMITTER powered.
RED LED: RECEIVER aligned. (N.B. after calibration this turns off in the presence of an obstacle).
RANGE: 20 m (in good weather conditions) N.B.: Range may be reduced in the presence of fog, rain, dust, etc.

State-of-the-art FIT SYNCRO photocells are designed to meet safety requirements for all automatic gate entry systems.
Wall versions are designed for assembly on posts in steel or other smooth material.
The box for flush-mounted installations (ACG8051) makes them easy to FIT to uneven brick surfaces.
The FIT photocells can be installed very close together thanks to the new SYNCHRO function.

FIT SYNCRO TECHNICAL SPECIFICATIONS

BOXES: surface-mounted in polycarbonate and nylon 6.
DIMENSIONS: 74x74x28 mm
POWER INPUT: 12Vdc/24Vac (select using the jumper on the electronic circuit). Make sure the system is compatible with the power provided by the power unit.
POWER CONSUMPTION: 80mA max.
TRANSMITTER: modulated with infrared diode
CAPACITY OF RELAY: 1A - 30Vdc
PROTECTED TO: IP44
GREEN LED: TRANSMITTER powered.
RED LED: RECEIVER aligned. (N.B. after calibration this turns off in the presence of an obstacle).
RANGE SELECTION: 15 m / 30 m (in good weather conditions) N.B.: Range may be reduced in the presence of fog, rain, dust, etc


PHOTOCELLS WITH BATTERIES empty batteries warning - range 25 m - 3 years batteries life - ACG8038		ALKALINE BATTERIES 4 X 1,5V AA ACG9519	PAIR OF COLUMNS ACG8039


FIT SLIM cod.ACG8032	PAIR OF FIT SLIM COLUMS cod.ACG8065	SLIM SYNCHRO TRANSMITTER for 2-3-4 pairs of FIT SLIM photocells cod. ACG8029


FIT SYNCRO cod.ACG8026	SYNCHRO TRANSMITTER for 2-3-4 pairs of photocells FIT cod. ACG8028	Containers to embedded cod.ACG8051